Showing posts with label quality manual. Show all posts
Showing posts with label quality manual. Show all posts

Monday, March 16, 2015

“A Deeper Dive: ISO 9001:2015”




It is our strong recommendation that organizations do not make changes to their quality management systems until the formal standard is released in 2015.
As a certified diver, there is probably nothing more satisfying and thrilling than seeing all of your training and preparation pay off as you gently glide through the water with harbor seals and sea lion pups frolicking and dancing around you, begging you to play.  As a father of three certified divers and being obsessively compulsive about their safety, getting to the play portion can only come after the safety portion.  I have personally sat through the training program three times when each of my sons became old enough to enter this whole new world of adventure, and therefore I feel that I have earned the right to be in charge of all the rules.  As we in the ISO family begin this brand new adventure into an uncharted world, I can’t help but make some simple connections between ISO and SCUBA.
Before each and every dive there are some safety protocols that each and every “good” diver should go through.  As a diver, you Begin With Review and Friends (BWRF).  This acronym stands for each of the safety checks that you and your buddy check out on each other’s equipment before each dive to ensure a successful dive.  “B” stands for BCD, or your Buoyancy Control Device. Does your flotation device work?  “W” stands for weights. Can you and your buddy easily remove the weights in the event of an emergency and get to the surface?  “R” stands for regulator. Does your breathing device work? No explanation needed.  “F” stands for a final once over for all the gear that will be going down with you to make sure that nothing is tangled, loose, missing, or defective.  You don’t want to get to the bottom and find out something isn’t right.
For our adventure into the deeper and uncharted waters of the ISO 9001:2015 Standard, I want to encourage you to use the same acronym but with a little twist on Begin With Review and Friends, “BWRF”.    “B” stands for Base.  What you have already put in place with your ISO 9001:2008 standard will become the base of your 2015 program.  Do not think that you have to go and start all over again.  You do not have to recreate the wheel.  You would think that this is common knowledge; however, I have already been approached by organizations to help them redo what has already been determined to be effective, efficient and compliant with both the 2008 & 2015 Standard.  In each of the coming months as we discuss how to actually begin to implement the new standard, we will always start with what 2008 has given you as a base before we begin building what 2015 is asking for.
“W” stands for “Woody is right!” Just Kidding?
“W” stands for What.  What does the new ISO 9001:2015 standard actually require?  Already, we have received questions from clients that indicate that people and organizations are beginning to read into the standard requirements that simply are not stated in the standard, but are being drawn out by interpretations.  This can result in far more complex, restrictive and overbearing management systems that in time may prove to be so cumbersome that the organization fails to realize the return on investment for their efforts.  As we journey through the ISO standard, we will take just a few statements to clarify exactly what the standard is saying and what it is not saying.  Hopefully this will keep organizations from getting too deep without enough air to support themselves.
“R” stands for Reason.  Reason will have a twofold purpose in our coming articles.  The first purpose will be an explanation as to some of the reasons why the ISO 2015 standard is requiring what they are requiring. The second and most important purpose will be a clear, concise and logical approach to achieving the requirement.  Many times organization will put in place multiple control features to ensure compliance in every possible scenario at the expense of time, resources, money and much frustration and anxiety.  ICH hopes to bring to the table implementation ideas and concepts that will help your organization fulfill the new requirements without overtaxing the organization and its resources.
“F” stands for Final.  When we say final, we want to ensure that organizations do not put anything in place that is not a good business practice...that if implemented and not a final requirement of the ISO 9001:2015 Standard, would not in any way negatively impact the organization.   With that being said, the final sections of each of the following news articles will focus on where organizations can begin to implement the new standard and not be at risk of putting an unnecessary activity or process in place that is not beneficial to the organization.  We will offer suggestions for user friendly methodologies for compliance.  We will suggest multiple possibilities as to where the organization can use systems that are already in place for compliance.  We will recommend best practices that have been identified across the country in the healthcare industry.  We will do our very best to make this transition to the new standard as painless as possible. And as always, we will be there to lend a helping hand or be a sounding board for any of your questions.
Who’s ready to Dive Deeper?  Next month we cover Management Review and Risk Control.
In over my head and loving it,
“W”
   

Friday, October 31, 2014

Putting all the Pieces Together



It is our strong recommendation that organizations do not make changes to their quality management systems until the formal standard is released in 2015.

I love jigsaw puzzles.  Almost every vacation my family takes includes a brand new puzzle, which my family and I will spend the quiet moments assembling.  I have a confession to make; I steal the last piece long before the puzzle is ever done.  There is just something about bringing all the pieces together, that in and of themselves’ has no true image or meaning, but when combined make a beautiful picture.  The reality is that each of my children and my wife contribute to the masterpiece just as much as I, but as the family’s “TOP MANAGEMENT” person I get to put in the last piece. It probably wouldn’t surprise anyone that my children have begun to replicate the process of stealing a piece, so at the end there are six pieces missing and a battle ensues for the placement of that final piece.

In section 7 “Support” of the ISO 9001:2015 standard we see the same puzzle coming together to help present the organization in its best light.  The good news is that, as far as significant changes in implementation, there are few.  Infrastructure and Work Environment remain virtually unchanged.  If you are an ISO geek like me, you may have noticed the note in 7.1.4 that Environment can include physical, social, psychological, environmental and other factor.  Don’t get too excited about trying to maintain and control social and psychological factors at this point.  They tried to put this same language into the 2000 revision of the ISO standard, but it never made the cut.  I suspect that it will quickly disappear in this version as well.  

Calibration remains primarily the same with the exception of the defining characteristics of when an organization implements full and traceable calibration.  In the 2008 standard the deciding factor is, “Where necessary to ensure valid results…..” in the 2015 standard the factor is, “Where measurement traceability is: a statutory, regulatory, customer, interested party, or organizational requirement.”
Training and competency remains the same, although the 2015 standard has extended the language.  The new standard incorporates items such as the quality policy, relevant objects, etc., into this section called Organizational knowledge, Competence and Awareness.  

The very end of section 7 is where one would find the most significant change to the standard.  Document Control and Record Control no longer exist as two separate requirements, but have been combined into what the standard is calling “Documented Information”.  Don’t let this throw you off.  Here are a few clarifying notes, “a peak at the puzzle box” to help you put it all together.

1.      There are only two statements directing the organization as to what documented information needs to be controlled.  (ISO required & Organization Required)
2.      There is no formal requirement for a Quality Manual or the ISO 9001:2008 six required procedures.
3.      The only definitive (called out by name) requirement is for a Quality Policy and Quality Objectives.
4.      The term “documented information” has replaced “documented procedure” as the identifier as to when the requirements for the control of documents and records is to be implemented.
5.      All the requirements in section 7.5 “Documented Information” can be applied to either a Document or a Record, however, as you are reading this section you will see that section 7.5.1,2,&3 most closely resembles the old document control and section 7.5.3.2 most closely resembles the old record control.

As you read through the new standard and begin to turn the pieces over from the blank side to the picture side, I am confident that you will breathe a sigh of relief. Before your eyes the puzzle will begin to show a picture that the intent of the standard has not really changed much.  The box of pieces has been shuffled, but the picture on the box remains the same. 

What we must keep in mind is that there is just something about bringing all the pieces together, that in and of themselves’ has no true image or meaning, but when combined in the right place, makes a beautiful picture. Each member of your team will contribute and hopefully you will not have any “piece thieves” along the way. This puzzle will require all members of the “family” to work together in contributing to the final piece of the puzzle placement! 

Last Piece Thief

Woody

Saturday, May 24, 2014

ISO 9001 Tips and Advice

ISO 9001 Tips and Advice 

Thursday, November 1, 2012

The Healthcare Industry's Recognized Four-Phased Approach





Explaining the Healthcare Industry Recognized Four-Phased Approach to ISO 9001 Implementation

As ISO 9001 becomes more recognized in the healthcare industry, proper implementation becomes crucial for those organizations that intend for their newly implemented ISO 9001 Quality Management System to be a performance versus a compliance based tool.


To help us in this endeavor, there is an industry recognized Four Phased Approach to implement ISO 9001 in healthcare organizations.  By following this Four Phased Approach that the healthcare industry recognizes to deliver the best results and, more importantly, results in a performance driven system that not only complies with the standard, but also produces consistent service delivery, customer (patient) satisfaction and continual improvement.

The four industry recognized phases:
  • Phase 1 – Foundation and Documentation
  • Phase 2 – Leadership Alignment
  • Phase 3 – Organization Integration
  • Phase 4 – System Validation





See our latest Newsletter Article for a more detailed explanation of the Industry Recognized Four-Phased Approach:  Click Here for the November Newsletter